Course # MTOP 1250
Duration: 42 weeks
Institute of Machine Tool Technology offers the most detail and suitable program to individuals who wish to become CNC Machine Tool Operators and Programmers. This program is design for individuals who has little or no experience working with CNC Machine Tools and would like to become part of this exciting industry of high end technology
|
| IMTT is an Authorized Siemens CNC Training Partner www.siemens.com for practical learning on Siemens Controls for Shop Mill and Shop Turn ( Milling and Turning ). This alliance is a tribute to IMTT’s strong commitment to education excellence.
This tie-up between Siemens and IMTT will go a long way in promoting technical education to engineering students in Canada through imparting practical knowledge of Siemens CNC Controls for Operation and Programming of Shop Mill and Shop Turn.
The following Training Courses are to be conducted on Siemens CNC Controls :
- OPERATION AND PROGRAMMING OF SHOP MILL
Contents
- Introduction to and overview of functionality
- Position Axis, speed and feed entry, change of tool, additional functions
- Setting up work pieces : Reference Points, Coordinate Systems, Zero offsets, processing levels, measuring
- Program structure, changes, test and graphical simulation
- Alarms and messages
- Use of rotation, mirroring, scaling
- Setting up work pieces: corrections, measuring
- Programming: Drilling, tapping, thread milling, position pattern, face milling of rectangular surfaces, milling of pockets, pins and slots
- Application of path milling and clearing cycles
- Entry and processing of any work pieces contours
- Working with several contour runs (islands)
- Program data backups
- Exercise using test controls and machine tools
|
| 2. OPERATION AND PROGRAMMING OF SHOP TURN
Contents
- Introduction to and overview of functionality
- Position Axis, speed and feed entry, change of tool
- Reference Points, Coordinate Systems, Zero offsets, Processing levels, Measuring
- Program structure and graphical simulation
- Using thread, groove and undercut cycles
- Working with raw and finished part contours
- Use of rotation, mirroring, scaling
- Alarms and messages
- Setting up work pieces
- Application of drilling and milling cycles
- Entry and processing of free work piece contours
- Application of Path Milling and clearing cycles
- Working with several contour runs ( islands )
- Program Data Backups
- Exercise using test controls and machine tools
Siemens AG founded in Berlin ( Germany ) in year 1847, is a technology giant operating in more than 190 countries, employing some 475,000 people worldwide. Their work in the fields of energy, industry, communications, information, transportation, healthcare, components and lighting have become essential parts of everyday life. Siemens had sales revenue of over US$ 107 billion and is ranked 28th in Global Fortune 500 list.
For more detail:
|
|
|
No comments yet.